Additive development could cut costs of low-pressure well retrofits

Unity is developing an additive-manufactured lightweight gate that could be retrofitted to xmas tree gate valves to address seal integrity in low-pressure wells.

Offshore staff

ABERDEEN, UK—Unity is developing an additive-manufactured lightweight gate that could be retrofitted to xmas tree gate valves to address seal integrity in low-pressure wells.

It follows a collaborative R&D project with the Net Zero Technology Centre in Aberdeen and UK North Sea operator Spirit Energy.

The gate is designed for late life, depleted and shut-in offshore wells, where the tubing head pressure may be too low to effectively seat the gate and seal the well.

Unity’s design is said to reduce the weight of the gate by about 60%, while retaining its intrinsic strength. It could save operators about £250,000 ($301,407) per well, the company claimed, through replacing a single surface component rather than the entire well control package.

A full replacement of low-pressure wellhead equipment would also involve substantial downtime, so this new solution could potentially minimize the associated production loss.

There are large numbers of low-pressure brownfield wells across the UK Continental Shelf, and more are entering this phase. The North Sea Transition Authority’s recent "Wells Insight Report" counted an active UKCS well stock of 2,629 wellbores. Of these, 1,661 were producing, while in 2021, the number of shut-in wells rose by 65 to 781.

Currently 30% of all UK offshore wells are said to be shut in, with associated intervention needs on infrastructure reportedly one of the main constraints.

Stuart Slater, Unity’s technical sales director, said, “The use of metal additive manufacturing means that we can offer attractive cost-savings and efficiencies to the industry, reducing raw materials, waste and operator investment in stock holding. 

“The delivery of single items is fast and more energy efficient than traditional forgings, with an impressive 90% average reduction in lead times. But the real saving in this case is achieved by approaching the problem from a different angle, so rather than replacing the whole surface well control package, we can quickly replace just a single small component, which offers huge cost and efficiency benefits.”

Unity has finished prototype tests on a 2-1/16-inch gate, and a 5-1/8-inch gate is now being manufactured to further the concept and qualify the product for commercialization.

02.13.2023

Sign up for our eNewsletters
Get the latest news and updates