Fugro finishes subsea work for BP offshore Trinidad and Tobago
Fugro has provided services to BP Trinidad and Tobago LLC related to the drilling and completion of five subsea wells in an area of strong currents.
GLASGOW, UK– Fugro has provided services to BP Trinidad and Tobago LLC (bpTT) related to the drilling and completion of five subsea wells in an area of strong currents, including wellhead motion (fatigue) monitoring, metocean measurements, and positioning services.
The positioning activities were carried out onboard the drilling vessel as well as on the three supporting anchor handling tugs, one of which had subsea acoustic ROV positioning. Fugro provided bpTT with dimensional control survey services, DGNSS verification, gyrocompass calibration and offset measurements, navigation at the well locations, and final positioning of the drilling vessel within the required tolerance of 3 m (10 ft).
Fugro said that this position accuracy was required because the five wells were being drilled in a cluster with separation ranging between 16 and 30 m (52 and 98 ft), and because of the need to accommodate subsea christmas trees. Survey support was provided for anchor handling and ROV operations as well as for subsea asset positioning.
To enable the monitoring of subsea equipment integrity during operations, Fugro supplied its Wellhead and Riser Instrumentation Service (WARIS) which included monitoring at two subsea locations: on the BOP stack, and also on the riser, immediately above the lower flex joint. Data was relayed to the vessel by hydroacoustic modems and then transferred to secure onshore storage, before being processed and made available to staff both offshore and onshore.
The motion measurements gave bpTT real-time tracking of wellhead fatigue as well as determination of foundation stiffness and the BOP stack resonant frequency, Fugro said. Midway through the program, the recorded real-time data was used to update theoretical fatigue transforms and improve the fatigue life of wellhead components.
Strong currents at the well location needed to be understood for operational planning, as well as further analysis of subsea equipment motions. Fugro installed an Acoustic Doppler Current Profiler on the seabed for metocean measurements. Current measurements were relayed to the vessel in real time using the same hydroacoustic equipment as with the WARIS.
bpTT Drilling Engineer Anil Saisbhan said: “The additional non-traditional services from Fugro with the WARIS and real-time ADCP measurements have enabled us to realize more fatigue life of wellhead components than was theoretically suggested, as well as to mitigate against operational risk with high currents which occur sporadically in the area.”