Saitec to install 50-MW floating wind farm in Mediterranean Sea

June 2, 2022
Saitec plans to develop a pre-commercial pilot park with five units and a total potential of 50 MW in the Mediterranean Sea in 2025.

Offshore staff

CATALONIA, Spain — Saitec plans to develop a pre-commercial pilot park with five units and a total potential of 50 MW in the Mediterranean Sea in 2025, according to a recent company news release.

The offshore wind turbines will use SATH technology in open sea in Girona, specifically in an area located more than 15 km from Cap de Creus on the Costa Brava (Catalonia).

Medfloat Pilot Parc has started with the presentation of the initial project document for assessment by the competent environmental body, which will answer with information on the scope that the environmental impact study should have. However, Saitec is already carrying out drafting work on the environmental impact study.

Medfloat Pilot Parc will involve the creation of a test infrastructure in the Levantino-Balearic Demarcation for the testing, demonstration and validation of SATH technology. It also will demonstrate the technical, environmental and social feasibility of future developments of floating offshore wind energy, and particularly of SATH technology, in the Mediterranean.

The company aims to investigate the possibilities of shared use with other activities, especially with fishing and aquaculture, as well as the promotion of employment and to boost the supply chain of offshore wind energy in Catalonia. In addition, the wind turbines will potentially provide power for 50,000 homes.

The selected installation area has been provisionally defined as priority use for offshore wind power in the Maritime Spatial Planning Plans of Spanish Government. At the same time, it meets the right wind and depth conditions to launch this project.

DemoSATH pilot project

Medfloat Pilot Parc is an initiative aligned with the climate neutrality objectives and one step forward in consolidating SATH technology after the development of the 2-MW DemoSATH project, which is under construction in the port of Bilbao. The objective of this pilot project, carried out in collaboration with RWE, is to test the technology and progress in the industrialized manufacturing process for this solution.

DemoSATH will be installed in the BiMEP test area (Biscay, Spain), where tests will be carried out for two years, providing useful information for the environmental evaluation of MedFloat. DemoSATH will be the first floating offshore wind turbine connected to the Spanish grid and capable of providing power to 2,000 homes.