Crystal introduces digital gauge

Offshore staff

SAN LUIS OBISPO, California --Crystal Engineering Corp. has developed the M1 digital pressure gauge. M1 gauges are rated in percent of reading and often replace three or more 0.25% mechanical gauges.

Unlike deadweight testers, these are not affected by ambient temperature or local gravity. The M1 digital pressure gauge has 0.2% of reading accuracy.

M1's are temperature compensated so the accuracy is the same over the operating temperature range. They also can be used to measure vacuum.

All M1 gauges are tested and calibrated in test chambers using computer directed pressure controllers. They are CE certified and are manufactured under an ISO 9001 registered quality system.

All M1 gauges come with a protective thermo plastic boot. The display is protected by a hard polycarbonate/polyester blend lens, and the sensor is made of welded stainless steel. A replaceable filter in the sensor keeps out debris.

M1's can survive being dropped and subjected to large over-pressure events with no change in calibration. The housing and boot are compatible with many industrial fluids including Skydrol.

5/11/2007