MacGregor to deliver traction winch systems for geological survey drilling vessel

Aug. 23, 2022
MacGregor, part of Cargotec, has been selected to supply two self-contained traction winch systems for a geological survey drilling vessel owned by Guangzhou Marine Geological Survey.

Offshore staff

FINLAND  MacGregor, part of Cargotec, has been selected to supply two self-contained traction winch systems for a geological survey drilling vessel owned by Guangzhou Marine Geological Survey, a subsidiary of China’s Ministry of Natural Resources, together with HongHai Marine.

HongHai Marine is MacGregor's partner in China, focusing on MacGregor deck machinery integration and service in the fishery and oceanographic markets.

The order was booked into Cargotec’s 2022 second-quarter order intake. The vessel is scheduled to be delivered in third-quarter 2024.

With the design of a 20-ft container footprint as a requirement, MacGregor’s scope of supply encompasses a system designed for 20 ton / 140 m/min (2,33m/sec) lifting capability and high-speed performance of 14 ton / 200 m/min (3,33m/sec). The self-contained traction winch has the ability to perform active heave compensation on the fly at 140 m/min.

The containerized system has everything installed on the unit and only needs the main power from the ship to be ready to operate.

The operator can manage the system either from the local operation panel on the winch, wireless radio remote control or from an additional control panel located where it is needed.

The setup is with a low-noise active frontend with an ability to regenerate power to the ship, or use the built in air brake resistors to get rid of generated power during lowering. The self-contained traction winch system is set up to have 13,800 m of 17-mm wire or EOM cable. A wire outlet possibility from zero to 180 degrees sideways, and -10 degrees to 80 degrees horizontal plans gives the operator a high flexibility for arrangement and places the self contained system onboard.

08.23.2022