SSTB 2012: Cameron features STM-15 subsea wellhead system

Offshore staff

GALVESTON, Texas – Subsea Tieback exhibitor Cameron is featuring its STM-15 Type DW5 15,000 psi WP Subsea Wellhead System on the exhibition floor. The STM-15 is a new technology that delivers up to 5.25 MM ft-lb bending capacity for enhanced performance for drilling and completion in water depths up to 10,000 ft (3,048 m).

Other key features include active pre-load lockdown at 2 MM lb; 5.25 MM ft-lb bending capacity; standard and high-capacity 16-in. supplemental hangers and adapters; machined from F-22, 85-ksi yield forged material; available for H2S service; and 7 MM lb end-load carrying capacity on single-landing shoulder for deep wells with complex casing programs.

Cameron says that its deepwater STM wellheads meet the requirements for most subsea drilling operations with deepwater semisubmersibles and drillships, as well as production applications such as tension-leg platforms, deep-draft caisson vessels and all types of subsea trees.

3/7/2012

The STM-15 Type DW5 Deepwater High-Capacity Subsea Wellhead System.

Cameron STM-15 Type DW5 Deepwater High-Capacity Subsea Wellhead System

Related Articles

NPD authorizes start-up of subsea compression at Gullfaks offshore Norway

Aug 27, 2015

Statoil and its partners have secured the consent of the Norwegian Petroleum Directorate to operate a new subsea wet gas compressor and umbilical on the Gullfaks field in the North Sea.

SCF acquires Cal Dive Australia

Aug 25, 2015

SCF has acquired the Australian and Southeast Asian business of Cal Dive International in partnership with Viburnum Funds and John Edwards.

Seal protects Shah Deniz subsea HIPPS valve

Aug 25, 2015

Trelleborg Sealing Solutions has developed a new type of seal for a valve designed by Aberdeen-based Schoolhill Hydraulic Engineering for BP’s Shah Deniz field development in the Caspian Sea.

UK CO2 storage project to analyze brine removal

Aug 24, 2015

The Energy Technologies Institute is seeking new partners for a project to study the impact of removing brine from subsea reservoirs in the UK sector used to store carbon dioxide. 

Petrex surveys integrity of North Sea Athena risers, moorings

Aug 24, 2015

Petrex Developments has completed inspection of the Athena FPSO’s dynamic flexible riser/umbilical systems, mooring system, and hull in the UK central North Sea for operator Ithaca Energy.

Trending News

Seismic survey navigates sensitive shallow-water UAE region

Sep 2, 2015

CGG, supported by its Seabed Geosolutions joint venture with Fugro, has completed a 3D seismic survey offshore/onshore Abu Dhabi.

Damen Twin Axe workboat destined for Middle East

Sep 2, 2015

Damen Shipyards has delivered a Damen Fast Crew Supplier 2610 workboat to Atlantic Maritime Group.

DCP compression platform in place at Malampaya

Sep 2, 2015

Installation has been completed of the 13,000-ton Malampaya depletion compression platform at Shell’s Malampaya field offshore the Philippines.

European Commission approves Shell, BG Group merger

Sep 2, 2015

The European Commission has approved unconditional clearance for the combination of Royal Dutch Shell and BG Group.

OFG, Fukada complete CSEM survey for hydrates offshore Japan

Sep 2, 2015

Ocean Floor Geophysics Ltd. and Fukada Salvage and Marine Works Co. Ltd. have completed a high-resolution CSEM survey of near surface gas hydrates offshore Japan.

  Offshore
Digital Magazine
Look Inside
Cover
Current Issue
Click to view the Offshore Learning Center

Oil & Gas Jobs

Search More Job Listings >>